AdvanTech Corporation
Fairfield, NJ
AdvanTech Corporation was founded in 1986 as an industrial controls and automation company located in Fairfield, New Jersey. Our staff has extensive experience in design, development and implementation of custom instrumentation, process control and monitoring projects for various industries utilizing computers, programmable controllers and related hardware/software products. Our degrees in computer science, electrical and mechanical engineering combined with experience in project management, system analysis, instrumentation, all areas of programmable control, communications and computer programming provide AdvanTech with the capability of solving a variety of complex industrial control problems. In addition, AdvanTech's close relationship with various manufacturers and suppliers of control and monitoring products provides AdvanTech with all the building blocks, which are necessary for the successful implementation of this project. AdvanTech Corporation is a Certified WBE (Women's Business Enterprise) and small business in the State of New Jersey, New York State and New York City. AdvanTech Corporation is also a Certified UL (Underwriters Laboratory) Shop for Control Panel Fabrication. For additional information about AdvanTech, please visit our website at www.advantechcorp.com.
PCE Monarch
Auburn Hills, MI
PCE Monarch has been providing system integration services since 1994. PCE Monarch's strength is in implementing engineered solutions for maufacturing processes in turn-key mode. Our solutions cover instrument specification, hardware/software design, project management for field installation, debug, start-up and training. These solutions have been primarily implmented in automotive assembly operations. PCE Monarch has extesive experience in fluid (liquid and air) storage, handling and delivery systems. PCE Monarch specifies and integrates the required instrumentation in PLC or PC-based control systems with a front-end human-machine interface (HMI) system. Due to the very nature of the paint environment, PCE Monarch's knowledge in this area lends itself to other industries employing a cleanroom type of environment, such as food and beverage, pharmaceutical manufacturing, test chambers, etc. PCE Monarch is a technologically forward-thinking company and has always enjoyed repeat business with its core customer group.
Applied Control Engineering, Inc.
Owings Mills, MD
Since 1991, Applied Control Engineering, Inc. (ACE) has been working with manufacturing and engineering professionals in every aspect of process control, manufacturing automation, and system integration. From a core background in the chemical industry, ACE has grown into providing system integration services to a very diverse set of industries from biotechnology & pharmaceuticals to metals & mining. As an independent system integrator, ACE has the expertise to interface systems from a variety of different vendor platforms into a single, homogeneous plant-wide control system. Having been successfully audited by dozens of customers in regulated industries and the Control System Integrators Association (CSIA), ACE is recognized for both our solid engineering and extensive quality system based on ISO 9000 and GAMP guidelines. Ultimately, our goal is to build long-term relationships with our customers, to the benefit of both companies. With engineering offices in Connecticut, Delaware, Maryland, Massachusetts, Pennsylvania, and Texas, ACE serves customer needs both locally and worldwide.
Dascan Industrial Controls
Troy, MI
DASCAN was formed in 1982 to serve the manufacturing, process control, automotive, and water/wastewater industries. The company's specific charter is to provide system integration services, which includes a wide range of engineering services from controls design to field implementation to documentation and training. DASCAN is committed to provide the finest systems integration services to its customers. DASCAN is a multi-million dollar controls engineering, panel assembly, and turnkey systems supplier. They also distribute and service a complete line of encoders and accessories for motion control applications.
Crossmuller Pty Ltd.
Glendenning, NSW, Australia
Crossmuller puts itself in a unique position in the integration marketplace by recognizing the need for companies to take ownership of new systems soon after installation. Projects are structured to provide on-going interaction with clients from design, to building, to installing and commissioning. Companies are encouraged to allocate resources to participate in this process. Crossmuller has practices in the areas of Automated Warehousing, Materials Handling, Systems Integration, MES Systems and Machine Vision. It provides manufacturing consulting services to help companies in their decision making processes.
Advanced Research Company
Orion, MI
Advanced Research Company is comprised of a staff of highly experienced individuals specializing in the integration of industrial control systems. Advanced Research has developed integrated solutions for the utilization of RFID technology in the tracking of assets in both the manufacturing and medical industries. Advanced Research can provide complete turnkey systems, including installation and start-up, and custom application software for CNCs, PLCs and ROBOT systems. In-house capabilities include CAD systems, ladder logic support, PC-based control applications, complete fabrication, and hands-on training. Staff members routinely implement control solutions for small manufacturers/OEMs, large automotive manufacturers, and many non-automotive customers. ARC is also involved in factory information systems and error-proofing systems on the manufacturing floor. In addition, ARC has experience with part-tracking systems using both barcode and RFID technologies.
Wunderlich-Malec Engineering
Tigard, OR
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Ghafari Associates
Dearborn, MI
Ghafari Associates, LLC is a leading control system design and engineering company providing innovative turnkey controls solutions to manufacturers worldwide. As an independent, full service firm, Ghafari has the resources to offer objective, single source project support in the system integration, consulting and control panel design and build fields. A uniquely-qualified staff of managers, engineers, and programmers gives Ghafari the expertise to meet client demand for material handling and process system controls, as well as for machine tool and robotic applications. Ghafari's design services include system architecture, bid packages, standards and specifications, and logic development. Their system integration services allow for the integration of production, material handling, engineering and purchasing into a single controlled system. Additionally, Ghafari provides total control panel design and build services for relay logic, PLCs, and computer controlled systems. Ghafari augments its turnkey services with a "team solutions" approach which addresses each project individually and utilizes the finest internal and external resources. Ghafari assures quality support and timely, cost-efficient project completion by forming strategic alliances with many leading companies.
JNE Automation
Hamilton, ON
JNE's team of highly experienced Automation experts can provide you with custom process control solutions to help achieve your business and production goals. With over 35 years working in the Metals industry, JNE has executed projects ranging from the raw materials yard to finished product. JNE has helped our clients migrate their legacy DCS and PLC installed base to modern integrated architectures to drive improved quality, yield, and reduce operating costs. With TUV certification, we specialize in control-reliable Process Safety Systems, with emphasis on Burner Management Systems and Combustion Control, allowing you to meet the latest applicable codes and standards. In an effort to provide our clients with a complete solution, JNE supplies custom designed control panels, operator stations, pulpit control desks, AC and DC drive panels, and complete prefabricated control rooms (PCRs). Our Panel Shop is UL certified, and can offer additional certifications as needed. JNE can also provide a complete range of multi-discipline engineering services to our clients performed under PMI and ISO guidelines to ensure quality. From project management to design engineering and construction, the JNE team has the expertise and innovation to engineer success for all of your projects. With offices in the USA and Canada, supplier-endorsed Partner status and membership in the Automation Alliance Group (AAG), JNE provides world class solutions built on worldwide experience.
InnCon Automation Corporation
West Valley, NY
InnCon Automation Corporation is a controls system engineering firm located in West Valley, New York. They offer a wide range of control system services, from on-site troubleshooting and maintenance support of existing processes to turnkey control system integration of expansion or new processes. Applications include water/wastewater, manufacturing, food and beverage, pharmaceutical, commercial printing, energy production, and many more. Since 1996, InnCon's engineering and design staff has aggressively and successfully served the process controls industry. This knowledge is complemented by extensive experience with all types of programmable logic controller and SCADA/PC based systems, including Allen-Bradley, Rockwell), Siemens, AutomationDirect, GE Intellution, and Wonderware. InnCon's goal is to provide cost-effective and reliable control/automation solutions to their customers by providing state-of-the-art engineering services at competitive rates on projects that are completed on schedule and within budget.
Brusche Industrial Automation
Almelo, Ov, Netherlands
Since 1957 Brusche Industrial Automation has become a key player in the field of electrical engineering in the eastern part of the Netherlands. Being a company in Twente, we are proud of our attitude and mentality which all our clients appreciate. This, as well as our knowledge and experience make Brusche Electrical Engineering the ideal partner for your industrial automation projects. Brusche Electrical Engineering is the right contact when it comes to automation of your operating system or your production environment. Client focused solutions in the field of adjustment, measurement, regulation, monitoring and control are only possible by providing custom made solutions. Custom made for both small solutions as well as larger solutions. We have chosen to carry out all electrical and automation work in-house, so you will have one contact for all your Industrial Automation projects. Brusche Electrical Engineering is a system integrator, operating in the area of process- and production automation and machine control. Of course we look very carefully at your organisation, your market, your business processes and your objectives. Also system demands, desires and problems within all levels of your company will be involved. This enables us to translate any system issue into an adequate and efficient solution where the security of your process is paramount. Our clients represent several industries, from concrete to plastics industry, from food to environmental projects and from special machines to process industry. Our activities in the field of industrial automation include: - Design, engineering and consultancy - Design, mounting and installation of control panels, MCC, switch boards, etc. - PLC and IPC control systems - Motion Control - Tracking & Tracing (including Vision and RFID solutions) - HMI & SCADA solutions - MES/OEE implementations - UL- & EX control panels - Machine safety - Service and Support (24h/7d)
Genesis Systems Group
Davenport, IA
Genesis Systems Group is a recognized leader in robotic systems integration. In business since 1983, Genesis specializes in factory automation of robotic assembly and handling systems for welded, mechanical and adhesive assembly processes and machine tending applications. Genesis' solutions focus is backed by expertise in part processing, process development, system and tooling design, motion controls, manufacture, and implementation of industrial automation. With over 4,000 robotic welding system installations, Genesis has workcells located in over 42 states and 15 different countries. Today, Genesis Systems Group's engineered solutions are used in manufacturing a number of different products; automobiles, construction and agricultural equipment, office furniture, trucks and trailers, lawn and garden equipment and recreational vehicles, to name a few.
Polaris Automation, Inc
Columbus, OH
Polaris Automation, Inc. is an engineering firm which specializes in the application and design of industrial automation control systems and IT applications. We provide a single source for control system responsibility, with global support and expertise for our customers. Teamwork is the key to turning great ideas into reality. Polaris Automation has been a leader in the industry for more than 30 years and our engineering staff boasts an average of over fifteen years of experience in the application and design of industrial automation control systems. Our diverse background provides our partners unique solutions'making Polaris Automation the logical choice to manage all of your control system needs.
Emerson Process Management
Round Rock, TX
Emerson Process Management (www.EmersonProcess.com), an Emerson business, is a leader in helping businesses automate their production, processing and distribution in the chemical, oil and gas, refining, pulp and paper, power, water and wastewater treatment, mining and metals, food and beverage, life sciences and other industries. The company combines superior products and technology with industry-specific engineering, consulting, project management and maintenance services.
WSP Canada Inc. (Automation Group)
Laval, QC
WSP Canada Inc.(Automation Group)is an experienced system integrator specializing in industrial automation and controls. Founded in 1993, the company employs over 40 automation and IT specialists. Through the completion of over 4000 projects, both locally and overseas, we have acquired in-depth knowledge of a wide variety of industrial applications in various fields such as forest products (pulp and paper, sawmills, board mills, engineered wood), cement and aggregates, mining, steam plants, water and waste, and various other industrial processes. We also specialize in obsolete control platform migrations (DCS to PLC, PLC to PLC) and have developed our own PLC conversion software tool (ex. A-B PLC3 to ControLogix). WSP Canada Inc.(Automation Group) is part of WSP Global, a multi-disciplined engineering firm employing over 35,000 people around the world.
Advanced Engineering, Inc.
Franklin, TN
Advanced Engineering has 20 years experience as an integrator. Advanced Engineering has pioneered the development of systems which not only control plant floor operations, but bridge the gap between the plant floor and the enterprise. While most other integrators' experience is limited to either the factory floor or the enterprise level, AE is one of the few who can bring together all the data needed to manage a manufacturing processes. By expertly staging data bases and collection mechanism, AE makes information readily accessible to all levels of management - accountants, engineers, plant managers, and operations alike.
Wood
Mumbai, India
Wood is a vendor-independent project management, automation and control engineering, procurement, construction and construction management services provider. Formed in 1996 the Automation & Control business consists of a dedicated and focused team of experienced automation experts supported by thousands of electrical, instrument, process and construction professionals. Our business unit is comprised of over 1,400 dedicated automation professionals distributed amongst 17 countries. Whether integrating proprietary or open systems, we are positioned for projects of virtually any size and scope. Wood is involved in a broad range of industries, from virtually all oil and gas segments to automotive manufacturing and fabrication, pharmaceuticals, forest industries, power, industrial, nuclear and mining and minerals. You name the industry, and we serve it. What might be unknown is that virtually wherever Wood goes, so goes our automation and controls experience. Our business model is built around delivering high quality, scalable, and flexible solutions to meet our client's entire project needs, often beyond the project's control system scope.
Panel Master LLC
LaGrange, OH
As control systems integrators and control panel builders, Tri-Tech Research applies factory automation experience to develop custom control systems. We provide systems for water and waste water systems, fuel delivery, furnace management, welding and assembly systems, batch and chemical process controls.
Cogent Industrial Technologies Ltd.
Richmond, BC
Cogent Industrial Technologies provides Electrical, Controls and IT system design and integration services to industrial operations and facilities. From greenfield to modernization projects, Cogent's services and solutions deliver a safe, reliable and efficient operation and empower your people to manage and improve operational performance.
MAVERICK Technologies, a Rockwell Automation Company
Tinley Park, IL
MAVERICK Technologies is a global leader in industrial automation, enterprise integration and sustaining services for clients across a wide range of manufacturing and process industries. Leveraging its unique enterprise-wide perspective, MAVERICK identifies suboptimal operations and improves performance for greater safety, efficiency and overall profitability. The company's people, processes and technical capabilities ensure delivery of the right solution for every project, using the most appropriate technology. Organizations around the world depend on MAVERICK's responsiveness, results-driven approach and dedication to their success. To learn more, please visit www.mavtechglobal.com
PLC2GO, Inc
New London, OH
PLC 2 GO, Inc. is located in New London, Ohio a suburb of Cleveland. The company provides control systems for process and machines. Also, we provide embedded control solutions to all industries. The types of control systems vary greatly from small embedded microprocessor based to large plantwide DCS control systems with multiple HMI stations. PLC 2 GO, Inc. also provides project management, commissioning, engineering, programming, and contract consulting services. We offer 100+ man-years of hands on experience to a multitude of industries.
Varec
Peachtree Corners, GA
Through years of involvement with tank gauging and inventory management systems, Varec has gained invaluable experience in systems integration. The company's flexible approach and open-communications architectures allow Varec to integrate existing and new technologies, providing a cost-effective migration path. Their system integration services include troubleshooting and problem solving, interface development, system architecture design, PLC programming, system configuration, system start-up services, and training.
Callisto Integration
Oakville, ON
Callisto Integration is a leader in the design, development, and implementation of Enterprise through Advanced Control systems, including MES. Callisto offers a full range of services including shop floor controls and SCADA systems, ERP integration, and manufacturing execution. The company leverages its in-depth knowledge of manufacturing processes to implement solutions that directly address a client's business and manufacturing objectives. Callisto is committed to providing the systems, tools, and training that enhance a client's productivity improvement initiatives. The company provides complete programming of programmable logic controllers (PLC) and supervisory control and data acquisition (SCADA) systems. Callisto has over 190+ experienced professionals with backgrounds in electrical, mechanical, chemical, and computer engineering that are able to solve a variety of complex industrial control problems. Callisto has executed over 4000 projects for companies throughout North America and the world since 1988. The company is a registered member of the Control System Integrators Association (CSIA).
SIGIT Automation Inc
Calgary, AB
SIGIT provides automation, instrumentation, controls and electrical services in a wide variety of industries. With offices in Calgary, Alberta, SIGIT is optimally positioned to meet any challenge that arises. Our team at SIGIT has some of the most skilled and versatile people in our industry. We have strong vendor relationships, which allow us to provide world class solutions for all of the unique challenges facing our clients.
Averna
San Rafael, CA
Averna is a global test engineering solutions company, and a strategic partner for innovative OEMs. Averna empowers high-tech manufacturers to accelerate electronic product development, achieve superior quality throughout the design lifecycle, and maximize productivity. One of the fastest-growing companies in North America, Averna combines off-the-shelf test software and systems, award-winning instrumentation and communication solutions, and decades of R&D and best practices expertise to help its clients stay ahead of the competition.
UTSI International Corporation
Friendswood, TX
UTSI International Corp. is a consulting and software development firm specializing in the practical application of real-time data acquisition and control technology to industrial automation. UTSI provides services including technology evaluation, preparation of design specifications, proposal evaluation, project management and integration support, and custom application software development. Expertise includes all facets of SCADA system design and integration including remote data acquisition equipment, local and wide area networks, master station architectures, and interfaces to external systems. Special emphasis is placed on providing well defined requirements that integrate the client's business needs with capabilities available in standard off-the-shelf SCADA packages. UTSI is also a well known real-time modeling and pipeline leak detection consulting resource, specializing in sensitivity studies, instrumentation analysis, incident analysis and compliance audits, as well as system design and requirements specification.
Compass Automation
Elgin, IL
Compass Automation designs and builds custom automation systems. They build automation for applications such as: assembly, inspection, deburring, painting, material handling, and packaging processes across a wide variety of industries. Their main distinctions are a bench full of mechanical engineers from MIT and an industry leading project management system they developed in-house. For more information, http://www.compass-automation.com/ call 847.426.6696 or e-mail us today at sales@compass-automation.com
JR Automation
Nashville, TN
JR Automation's Wright Industries division is the south's largest turnkey automation systems integrator, located in Nashville, Tennessee. The Wright division began business in Nashville in 1945. Today it is staffed with over 400 employees and is utilizing over 250,000 sq. ft. of air-conditioned plant space. Their in-house manufacturing capability allows very tight control for fast track projects in today's highly competitive markets. Their project management system is one of the finest in the nation providing their customers with timely information as to the overall progress of their projects. This tight management control allows JR Automation's Wright Industries division to be highly competitive in a world-class manufacturing environment.
Wineman Technology Incorporated
Saginaw, MI
Wineman Technology is an industrial automation and control systems integrator which has experienced growth every year since 1991. Their expertise includes hardware design, software development, control systems start-up/debug, and complete automated test equipment development and fabrication. Because of the knowledge and commitment of their engineering staff, Wineman Technology has continually received repeat business from their clients. The company believes this is the true test of the quality of their services. From simple panel build to complete design and integration of control systems and automated test equipment, Wineman Technology commits to deliver above their clients expectations.
Skye Controls & Design Inc
Spencerport, NY
Skye Controls provides automation control systems and custom control panel enclosures. The company focuses on their clients' needs. Their products range from industrial control panels comprised of simple hard-wired control logic to the most sophisticated programmable control systems integrated with data acquisition systems. Their services range from instrumentation and panel specification to project management, programming, installation, training and support. Skye Controls has provided industrial automation control solutions for a wide variety of industries throughout the United States as well as internationally. The company's personnel have over 50 years combined experience in data acquisition, motion control, PLC programming, HMI programming, robotics, servo architecture, LabVIEW, C, Visual Basic, DeviceNet, ASI and Ethernet I/P, as well as newer technologies such as machine vision, Internet publishing, database connectivity and ActiveX. Skye Controls is also a global resource center for companies requiring help and support when developing a successful data acquisition solution. They are dedicated to developing a superior process, addressing each of their client's unique needs while bringing consistent and reliable performance.
ECN Automation
Tempe, AZ
ECN Automation helps companies develop, commission and start-up world-class industrial processes, mainly in the mining industry. ECN was founded in 1991 and has completed more than 700 successful control and automation projects. Our Specialty is the full development of new mines, and the Migration of Legacy DCS platforms.
Atlas Technologies, Inc.
Fenton, MI
Atlas Technologies, Inc. is a company with a history and a future of excellence. By combining expertise developed by FEC, Melvin-AHD, Atlas Automation, and Automated Manufacturing Systems with the newest technologies, Atlas offers flexible solutions to their customers primarily in automated metalforming and sheet metal assembly systems. Atlas Technologies is dedicated to the quality and value in their products and long-term partnerships with their employees, customers and suppliers. The Atlas team of over 180 professionals provides innovative products and services to primarily the automotive and appliance industries, with an annual sales volume of appx. $25,000,000. Operating from two sales, administrative, and engineering offices, and one manufacturing plants, Atlas Technologies has in-house the expertise required to solve even the most complex of problems.
Applied Motion Systems, Inc.
Vancouver, WA
Applied Motion Systems is an applied engineering and technology company that helps manufacturers improve the safety, performance, reliability, and operation of their production systems by developing innovative machines and high-performance automation and control systems. We specialize in upgrading the safety, control, and drivetrain sub-systems on machines that require precise coordination of multiple motors. We serve a broad range of industries including paper and paper converting, forest products, glass container manufacturing, aerospace, and renewable energy. AMS deploys is a certified solution partner for automation suppliers such as Siemens, Rockwell, ABB and Control-Techniques. Visit us at www.appliedmotionsystems.com
RCK Controls, Inc
San Diego, CA
RCK Controls provides custom control systems, enclosures, and engineering services within assorted industries. Their educational and professional backgrounds include bioengineering, economics, mechanical engineering, computer science, and water treatment including a Registered Professional Engineer in the control system engineering discipline.
Toolmen Corporation
Round Rock, TX
Toolmen is an electromechanical engineering company that builds specific-purpose machine tools. These are CNC machines that are optimized for a specific task or group of tasks and then simplified for cost. The company utilizes standard platforms which stand as a building block for their machine tool solutions. In this way, they build machines for significantly less money with better productivity than a general-purpose machine tool. Toolmen has significant experience with milling, drilling, routing, waterjet, laser, ultrasonic, plasma, welding, and multi-process combinations of the above. They are also presenting adaptive solutions which feature real-time motion path adjustment based on input from external sensors such as vision or laser. Toolmen utilizes their extensive experience with computer integrated mechanics to provide optimized automation packages and machinery in a similar way to their machine tool solutions. They work with customers to optimize or develop and optimize machine control solutions and processes that meet their customers' goals. Their experience includes many types of packaging machines, converting machines, robotics, material handling systems, and semiconductor machines. They also feature adaptive solutions in which they can modify in real time the motion path utilizing input from external sensors such as vision or laser.
Conveyor & Automation Technologies
Towson, MD
Conveyor and Automation Technologies is a systems integrator focused on custom-designed solutions for a variety of industries, including food and beverage, container, consumer goods, manufacturing, material handling, warehousing and distribution, robotic palletizing and robotic casepacking. They can convey, accumulate and package a client's products with a cost-competitive solution to help the client compete in the marketplace. Conveyor and Automation Technologies was established with the goal of providing custom solutions that will establish their clients as leaders in their industries. They establish a scope, budget and schedule that will fit a client's production requirements and produce a rapid return on investment. They utilize their integration capabilities to provide customers with solutions to their packaging and processing challenges.
Emprise Corporation
Kennesaw, GA
Emprise Corporation is an engineering consulting firm specializing in the design, fabrication, and installation of test equipment, test facilities and data acquisition/control systems. Emprise test stands are used for research and development as well as post-production and post-overhaul testing. Emprise serves the automotive, aerospace, industrial power, and manufacturing industries. Alternate power is a specialty. Some recent projects include turbocharger, engine dynamometer, emissions and transmission test stands; a jet engine starter test stand and a rotary actuator test bench; a gas turbine test stand; refrigeration compressor test stands, oil pump test stands, filter test stands; and a fuel cell test facility.
North Point Technology, LLC
Johnson City, NY
North Point Technology, LLC is an automation engineering and system integration firm with a distinct focus on client support. This philosophy, combined with technical expertise and unique software development tools, has lead to an excellent reputation with existing clients near the company's Mid-Atlantic headquarters, around the country, and increasingly, around the world.
Acieta, LLC
Council Bluffs, IA
A leader in the robotics business for 34 years, Acieta provides a wide range of robotically automated solutions and services for the manufacturing industry. With locations in Pewaukee, Wis., and Council Bluffs, Iowa, Acieta has integrated more than 4,200 automation systems for customers across the United States, Mexico and Canada. As part of its mission to be a true partner to its customer base, Acieta is committed to solving challenges facing all manufacturers, such as lowering costs, increasing productivity and addressing labor shortfalls. Serving most manufacturing segments, Acieta has 130 employees across the United States and is committed to creating a positive future for North American manufacturing. For more information about Acieta, visit www.acieta.com.
Complere Engineering Group, Inc.
Modesto, CA
Complere Engineering is a full-service engineering company with a staff of 25 engineers and designers experienced in the fields of machine/process automation and material handling systems. Turnkey projects support including structural, mechanical, electrical,and process engineering; process automation, and project management is their flagship service. An electrical panel shop is maintained for project needs. The company has a solid background of top-notch performance with most major PLCs, SCADA, and operator interface devices for applications in food and beverage processing, material handling, and consumer products man
Avid Solutions Inc.
Morrisville, NC
Avid Solutions is a fast-growing system integrator specializing in industrial automation and information solutions. We got our start on the plant floor, which enables us to apply a unique combination of plant floor experience, IT and operations expertise, and process industry knowledge to helping solve tough control problems. Our Trusted Partner customers rely on our consultants' knowledge of advanced control theory to bring strategic, long-term value far beyond programming and automation technologies ' and to tackle today's control issues with tomorrow's challenges in mind. We collaborate with clients to identify and select best-in-class platforms, design and implement systems, and provide FDA validation documentation and services. Turnkey capabilities include UL panel fabrication and installation and system commissioning. Avid has developed exceptional depth in PLC, HMI, DCS, and information applications in the following process industries: chemical, food & beverage, life sciences, power generation, and pulp & paper. We are vendor-neutral and flexible, and we pride ourselves on long-standing customer relationships that are built on technical acumen, two-way communication, and mutual trust. With more than 100 employees and office locations in Winston-Salem and Raleigh, NC, Atlanta, GA, and Sao Paolo, Brazil, Avid Solutions has provided industrial automation and information solutions across the U.S. and globally for almost 30 years.
B&K Factory Automation Corp.
Franklin Park, IL
B&K Factory Automation Corp. specializes in the design and installation of industrial control and automation systems. Some of our projects have included PLCs, operator interfaces, motion control, robotics, material handling systems, packaging machinery, and process control. The entire process is carried out by an experienced staff of engineers and technicians on state-of-the-art equipment. They offer superior service, craftsmanship, support, and documentation for all of a client's control needs. The company's project scope typically covers the full project life cycle from conception to installation, start-up, and optimization. They are dedicated to providing their clients the best in terms of innovation and cost effective solutions. Having been involved in industrial automation for over 15 years, the company has seen the need for a firm that is willing and able to work closely with clients in order to help them improve their manufacturing needs and increase their profitability. As a newcomer to the area the company is focusing on building a solid name for themselves in the industry by continuous improvement and above all, customer satisfaction. We will work with you on selecting the proper control solutions for your unique application that will offer you the power and diversity in a multitude of factors.
Industrial Automation Networks Inc.
Wainwright, AB
Industrial Automation Networks Inc. offers services, engineering support and assistance in the following areas of field level industrial networks communications:
ESC Engineering
Fort Collins, CO
ESC engineering is a firm specializing in providing electrical engineering and control systems integration services for utilities, industrial facilities, municipalities, and commercial entities. Client satisfaction is the key to continued success at ESC. This satisfaction requires high quality engineering services along with a total commitment and responsiveness to a client's needs. ESC is an employee-owned company comprised of individuals that understand the importance of quality service and attention. ESC's engineering staff has the track record and skills to provide complete automation solutions including the capability to integrate functionality across multiple platforms linking SCADA, DCS, PLC, and process-level controls, as well as the communications systems to tie them together. Their expertise in their focused industries allows them to work on behalf of their clients and with solution providers and manufacturers to join the right products and services to meet the demands of the most difficult process, operations, and business needs, all while designing systems that are useful, intuitive, and maintainable. ESC designs each solution to help clients meet their goals and objectives, regardless of the size of a project.
Triad Automation, Inc.
Brown Summit, NC
Triad Automation is a full service industrial controls distributor/integrator with experience in many industries and manufacturing operations, including automotive, paper, pharmaceuticals, power, film, textiles and more. Triad Automation is a distrubutor for many top manufacturers such as ABB, Baldor, Banner, GE/Fanuc, Stearns and SSD. Triad Automation's engineers are factory automation experts, offering application assistance, system integration and field service. Triad Automation is a one-stop shop for industrial controls, offering top brands, low prices and outstanding service. Triad Automation runs the business on a reputation for integrity and quality craftsmanship.
Champion Technology Services, Inc. - Grand Junction, CO
Grand Junction, CO
Champion Technology Services, Inc. is experienced in the design, fabrication, integration, installation, commissioning, and follow-up maintenance of control systems using the latest DCS, PLC, HMI, SCADA system, and hybrid technologies. They are also very knowledgeable in the maintenance and migration of many legacy systems. In addition, they can create custom applications and have experience with numerous historians and data management products. Their telecommunications group handles tower maintenance, path surveys and numerous other communication related services.
Hegwood Electric Service, Inc.
Doraville, GA
Working to be a Globally Recognized Name for Quality and Service in the Industrial Automation & Controls Industry. We have a PASSION for CREATING solutions! Founded in 1970 by Gene Hegwood, Hegwood Electric is an Industrial Automation and Controls company that provides not only products, but solutions for our customers. With experience, training and control knowledge, Hegwood Electric has designed, built, and provided start-up for automation and control systems globally. We're working to be a Globally Recognized Name for Quality and Service in Industrial Automation and Controls by having a Passion for Creating solutions. Operating from Georgia, our factory trained and experienced staff has not only served the South Eastern customer effectively but also customers throughout the United States, Canada, Asia, Africa, Central America, South America and Europe. In the Industrial Automation and Controls industry, we are proud to bring our services to many different industries from carpet to chemical, marble to municipalities, beef to poultry, oil to water. We have worked with various customers in solving their individual automation and control needs. We welcome the opportunity to speak with customers concerning their requirements. The solutions we have provided for automation and control include: Process Control, Machine Control, SCADA, HMI, Remote Data / Telemetry, Material Handling, Pump & Fluid Control, and more. With experience, training and control knowledge developed since 1970, including Spanish language skills, Hegwood Electric has designed, built, and provided start-up for automation and control systems globally.
Miller-Eads Automation
Indianapolis, IN
Miller-Eads Automation is an Industrial Automation and Controls Integration company. We specialize in new and upgrade projects of all sizes. A division of one of Indiana's largest electrical contractors, Miller-Eads Automation is a total turnkey solution for your company. We have completed projects in pharmaceuticals, food & beverage, composites, metals, packaging, and many other industries. By integrating with Miller-Eads Electrical Division, we are able to design control systems, build them in our UL 508A certified panel shop, and complete the programming and roll-out under a single roof. In addition to our hardware capabilities, we possess computer science skills that allow us to integrate our equipment into SCADA (Supervisory Control and Data Acquisition), MES (Manufacturing Execution Systems for Process improvement), CMMS (Computerized Maintenance Management Systems), and connect everything through a database and other systems, such as ERP (Enterprise Resource Planning). Our UL 508A Certified, cutting-edge panel shop, located on the Miller-Eads premises, is producing some of the highest-quality industrial control enclosures on the market. We are the only enclosure builder that combines the renowned UL safety and quality standards with the superior skill and experience of the electricians of IBEW Local Union 481. From enclosure design to field installation and servicing, we have the knowledge that enables our team of engineers, specialists and electricians to recognize and execute the best possible solution for your company. From the plant floor to the executive boardroom, we offer specifically tailored solutions, leveraging modern technologies and practices to increase your company's productivity in today's evolving marketplace.
Wunderlich-Malec Engineering
Henderson, NV
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
RF Automatizacion S.A.
San Jose, Costa Rica
Located at San Jose Costa Rica. Serves the following markets: Food & Beverage, Thermodyamics Systems, Automation Information Solutions, Water & Wastewater, Pulp & Paper, Combustion and Burner Systems, Process Systems & KPI & Metrics for Production. Experienced Engineering since 1996. We work with the highest levels of quality, professionalism and confidentiality.
MuSoft Systems Inc.
Peterborough, ON
MuSoft Systems Inc. is an automation/process control design and systems integration company, designing system solutions for industrial clients since 1987. Although based in Peterborough, ON, Canada, MuSoft is available to work on projects throughout North America and abroad. MuSoft has successfully completed projects for large corporations, such as BP, GE-Hitachi Nuclear, GE Industrial Systems, GE Motors and Siemens. These projects included complete synchronous motor master controller development (Hot Backup Redundancy), complex robotic control system development, and modular fieldbus development, systems integration and on-site commissioning (including projects in China). MuSoft engineers can provide a cost effective design and integration resource for a client's projects, from project requirements analysis and specification through system design, to thorough unit testing, system integration and commissioning.
Professional Control Corporation
Germantown, WI
PCC offers over 28 years of experience in providing industrial automation services and solutions. Their experience allows them to offer a complete range of solutions from initial design to engineering, installation, testing, startup and training of industrial automation systems. Their services and solutions are offered in a broad range of applications from machine control, process control, material handling and more. From complex leading-edge technologies to simple off-the-shelf control components, PCC provides the local training and engineering expertise needed to develop innovative solutions while compressing design and delivery cycle times enhancing your competitive advantage. PCC's highly trained sales and application engineers are creative, service-intensive, and committed to supporting a project from start to finish. PCC's expertise is in PLC's and peripherals, operator interface, industrial computers, factory-wide networks, I/O systems, and industrial safety solutions. Armed with 28 years of solid broad-based experience and backed by the resources of an entire network of suppliers, PCC is determined to provide the highest quality solutions to each client's unique needs.
Wolock & Lott
Branchburg, NJ
Wolock & Lott has been an integrator of custom industrial control systems, builder of custom industrial control panels and a distributor of industrial drives / control products since 1965.
ixmation North America
Roselle, IL
Ixmation COX Systems has been in business for over 40 years conceptualizing, designing and building custom automation. They strive to provide reliable and efficient machines using the most effective technologies and consistent procedures.
Automated Systems, Inc
Lake Bluff, IL
Automated Systems, Inc (ASI) is a premiere systems integrator specializing in the most demanding pharmaceutical applications. ASI serves a varied clientele in the pharmaceutical, biotech, and medical device industries. The staff has a thorough understanding of systems integration for pharmaceutical processes and can provide expertise in regulatory compliance, quality systems, validation, qualification, custom software, and enterprise database development. The ASI staff can provide validation expertise for facilities, computer, equipment, and utilities and deliver a full range of quality services, including mock audits, vendor qualification, validation protocol generation, and execution and routing.
Queue Systems, Inc.
Columbia, SC
Queue Systems has been providing quality process and information solutions to industrial customers since 1989. Queue specializes in process information management systems (PIMS), supervisory control and data acquisition (SCADA), and advanced regulatory process control and optimization. Queue partners with leading suppliers of PIMS, SCADA, and advanced regulatory control packages. Queue's unique connectivity and reliability products facilitate systems integration projects. Queue has extensive experience with legacy to open systems migration projects and has developed specialized hardware and software products to support such efforts. Queue's full project life cycle professional services assure that projects are completed on time, within budget, and to their customers' complete satisfaction. Queue's skills include requirements analysis, project planning, system and network architecture, software and hardware architecture design, communications architecture design, object-oriented design and development, high performance interfaces, system installation and test, technical documentation, project management, training, and support.
Phoenix Consulting, LLC
Fort Wayne, IN
Phoenix Consulting has over 75 years of combined experience. The company specializes in supplying control and information technology solutions for advanced manufacturing processes. Our mission is to apply technology to improve our customers' productivity while reducing their risk. Since 2006, Phoenix Consulting has completed successful projects in both control and information management in the automotive, discrete, process, special machine, and water/wastewater industries. Plant floor to Desktop, Phoenix Consulting controls it all!
Automation Systems International
Oconomowoc, WI
Automation Systems International is a full service solutions provider, control systems engineering, and integration company. ASI provides turnkey control systems engineering and integration services to meet their customers' productivity demands and needs. ASI supports those customers on a worldwide basis. Services include control systems analysis; control systems electrical design/control panel assembly; control software development; systems integration and testing; system qualification; mechanical design, fabrication, and assembly; complete systems documentation; and training consulting. Please feel free to contact us at 262-367-7171 x104.
Dynalectric Company
San Diego, CA
JMP Engineering Inc.
Cambridge, ON
JMP Engineering designs and integrates technology-based solutions that improve productivity, profitability and quality. With 8,500 projects delivered, manufacturing and process customers look to JMP for new perspectives and ideas that generate performance improvement. CSIA Certified. Control System Integrator Hall of Fame. Packaging Integrator Hall of Fame. Microsoft Impact Award Recipient.
The RoviSys Company
Houston, TX
RoviSys is distinctively qualified to deliver solutions that improve operational and financial results. For over 25 years, we have provided independent process automation, integration and information solutions for clients with large and small-scale operations. Our independence combined with experience and innovative thinking results in efficiency and quality in the creation of functional specifications, instrument specifications, process documentation, electrical design, and system configuration. Automation is a complex process. We have a thorough understanding of the most effective methods for building, analyzing, improving and maintaining automation systems for these industries: Chemicals| Food &Beverage | Glass | Life Sciences | Metals | Oil & Gas | Power & Energy | Water/Wastewater | Paper & Wood Deep process knowledge and exceptional service. Our solutions range from problem identification to project completion, and include these services: Control Systems | Validated Systems | Building Automation | Electrical & Instrumentation Design |Manufacturing IT | Software Development | Test Automation | Industrial Network Services | ERP When clients are asked why they choose RoviSys project after project, the common response is our unique ability to manage, deliver, and complete projects. Our integrity and ongoing focus on customer satisfaction assures precise, proven solutions with continuing support.
E-Technologies Group, Inc.
West Chester, OH
For 20 years, E-Technologies Group has been listening to our customers changing business needs, responding with high value robust solutions to give our clients the competitive advantage they need in a challenging environment. Our 100 engineers excel in multiple areas needed in today's manufacturing world. The organization offers complete automation solutions, including everything from electrical design to PLC, and HMI SCADA systems to integrating manufacturing data into business-wide systems. E-Technologies Group will successfully execute your project. Whether it is a small improvement or a large turnkey automation project, you can find real solutions with E-Tech.
Autolog Inc.
Blainville, QC
Autolog designs, manufactures and installs sawmill process control and optimization systems. Since 1987, Autolog has equiped sawmills throughout North America and Europe. Process and optimization systems allow sawmills to increase productivity and lumber quality while reducing the volume of raw material required to produce lumber. These systems offer an average payback of less than one year. Accustomed to build control panels for its own needs, Autolog is now offering its expertise for any control panels, operator consoles design, cabling, testing etc. Autolog is licensed by CSA (Canadian Standards Association) to build approved panels for Canadian and United States markets.
Aladdin Engineering & Manufacturing, Inc.
Waukesha, WI
Innovation begins with Aladdin. Since their founding in 1953, Aladdin Engineering & Manufacturing has designed and built custom machines and systems for major players across a range of industries worldwide. In doing so, they have established themselves as one of the most experienced companies for special manufacturing equipment in the United States. Aladdin has a reputation for delivering robust equipment. Clients have relied on them to provide equipment that can handle products from eight-ton transformer coils to small assemblies that fit in your hand and anything in between. Their systems often include precision equipment that assembles parts requiring single-digit micron tolerances. Aladdin leverages its exposure to a multitude of industries to constantly improve their approaches and incorporate the latest technology and components. They will work with you to discover your needs and identify a solution that you need, not overselling and not under-delivering. Their goal is to establish partnerships, not simply be a transactional supplier. They stand behind their equipment. If ever a challenge arises or you need a change, they are right beside you. Their team of dedicated project managers, highly skilled engineers, and talented fabricators bring unparalleled experience together to create innovative unique solutions that keep you operating efficiently and ahead of your competitors. It is no secret that designing and building custom manufacturing equipment requires extensive experience and a flair for innovation. Aladdin's understanding of production procedures and mastery of manufacturing techniques help them to reach the ultimate goal with clients: to design and build systems that exceed expectations and respect the bottom line.
Kline Process Systems
Wyomissing, PA
Kline Process Systems provides solutions to a client's biggest automation challenges from process upgrades to turnkey control system design, programming, and integration. These solutions improve quality, reduce cost, and are measurable at the bottom line. Kline Process Systems offers a wide range of services including process design, control system design, manufacturing execution systems, programming, panel fabrication, electrical construction, process piping installation, and weekend plant conversions. KPS can build a new plant or optimize an existing process. KPS understands the process and related technology to support a client's automation needs.
Pesce Pty Ltd
Mawson, Australia
Pesce is a specialist automation system provider dedicated to offering high-quality process automation and power distribution monitoring solutions. We have extensive dairy and food manufacturing industry experience using a range of control hardware and software. We have significant experience implementing power monitoring and control systems for HV and LV power distribution through large commercial buildings and site wide private distribution networks. We can provide you with a fully functional, tested and documented system that is easily maintained and meets both your requirements and budget. We have demonstrated proficiency in control system design and implementation, testing and commissioning, including programming PLCs, RTUs, Citect and other HMI systems, automated collection and storage of operational and performance data and implementation of effective industrial communications systems using a variety of protocols.
Wood
Santiago de Chile, Chile
Wood is a vendor-independent project management, automation and control engineering, procurement, construction and construction management services provider. Formed in 1996 the Automation & Control business consists of a dedicated and focused team of experienced automation experts supported by thousands of electrical, instrument, process and construction professionals. Our business unit is comprised of over 1,400 dedicated automation professionals distributed amongst 17 countries. Whether integrating proprietary or open systems, we are positioned for projects of virtually any size and scope. Wood is involved in a broad range of industries, from virtually all oil and gas segments to automotive manufacturing and fabrication, pharmaceuticals, forest industries, power, industrial, nuclear and mining and minerals. You name the industry, and we serve it. What might be unknown is that virtually wherever Wood goes, so goes our automation and controls experience. Our business model is built around delivering high quality, scalable, and flexible solutions to meet our client's entire project needs, often beyond the project's control system scope.
Automated Mfg Solutions, Inc.
Strongsville, OH
Automated Manufacturing Solutions, Inc. (AMS) provides manufacturers and OEM's a reliable resource for custom manufacturing machinery, professional engineering services, control panel building and integration, and contract manufacturing. AMS has a strong engineering background and extensive experience in automotive-type stamping and assembly operations. AMS builds automated solutions utilizing the latest technologies from robotics and vision systems to lasers and sophisticated servo controlled systems. AMS specializes in the engineering and building of manufacturing equipment for assembly, welding, machining, press room automation, material handling and testing. AMS is a vertically integrated company of engineers, tool makers, and electricians. AMS has complete fabricating, machining, machine-building and panel-building capabilities in-house.
M&L Controls Inc.
West Alexandria, OH
M&L Controls has been providing control solutions for over 11 years. M&L Controls has expertise in both continuous and batch processes. M&L Controls can take a project from concept to completion. M&L Controls can be an extension of a client's personnel or take complete responsibility for a project. M&L Controls can perform the following services to name just a few: capital cost estimating, instrumentation specification and selection, system engineering and design, funtional requirements, construction coordination, configuration, training, start-up, and commissioning.
Innovative Controls Corporation
Toledo, OH
Innovative Controls is a leading systems integrator from northwest Ohio. ICON has significant experience in foods, packaging and automated material handling. ICON's broad base of experience uniquely positions them to be the cost-effective provider for a client's integration needs.
Odyssey Controls
Bergen, NY
Odyssey Controls is an innovative and specialized company that supplies industries with the latest technology in control systems and automation devices. Odyssey Controls offers solutions for industrial control and automation problems that range from the simplest electrical components to the most sophisticated programmable control systems. With over 10 years of experience in the controls and automation industry, the Odyssey team covers a broad range of project activities. This allows for a diverse product and service portfolio, with an emphasis being placed on design-to-build enclosures and turn-key control systems.
APEX Manufacturing Solutions
Boise, ID
APEX provides comprehensive, end-to-end manufacturing solutions that include automation systems design and integration, Manufacturing Execution Systems, continuous improvement consulting and implementation, and support and maintenance services. APEX teams only with leading manufacturing software and hardware vendors. Our selection and qualification process ensures that the systems and solutions we provide you are based on technologies that are: Market Leaders Innovators Holistic Manufacturing Solutions Providers Providers of Low Total Cost of Ownership (TCO) solutions Standards-based Extensible Supportable We tailor all our solutions to the individual needs of each customer, selecting the "best of breed" platform technologies for the best technical fit with your standards and protection of the your existing investments in automation, control, supervisory, reporting and business systems.
Altron Bytes Systems Integration
Midrand, GAU, South Africa
Altron Bytes Systems Integration provides a broad range of products, technical skills and specialized services to support enterprise-wide IT infrastructure and telecommunications across Africa, Middle East and in the United Kingdom. Altron Bytes implemented solutions at most of the biggest corporations in Southern Africa.
KDC Systems
Los Alamitos, CA
KDC Systems is a full service systems integrator and control system contractor providing quality engineering, programming, fabrication, installation, calibration, and validation since 1983. KDC Systems offers extensive experience with a wide range of control systems technologies. We have integrated many combinations of programmable logic controllers (PLCs) with operator interface terminals (OITs) and human-machine interface (HMI) software packages. Our familiarity with numerous product lines and process types enables us to provide best-in-class solutions for any need. Our goal is to integrate commercial-off-the-shelf hardware/software products to develop a robust cost-effective automation solution for you. Whether the automation project is a small relay replacement panel, an OEM machine or skid, a medium-size manufacturing operation or a multi-thousand I/O process with dozens of control panels, we are equipped to provide a high-performance solution for you. Our team of engineers and technicians includes Professional Engineers and ISA certified CAP and CCST personnel, experienced in a wide range of disciplines to provide the level of detail the project demands. We have an in-house UL508A control panel fabrication shop, and a large field installation staff specifically experienced with automation system installations. KDC Systems is ISO 9001 certified and a member of the CSIA, and is capable of bonding to $50 million.
PREMIER System Integrators, Inc.
Smyrna, TN
Premier System Integrators, Inc. has turnkey system integration capabilities for providing complete industrial automation solutions. Premier is able to take automation and factory information requirements and turn them into functioning plant systems, supplying everything from the limit switch to the database. Strategic alliances with the top electrical controls manufacturers, computer manufacturers, and software vendors provides ready access to the best off-the-shelf and customizable components and systems. Premier System Integrators is recognized for its standards of quality, workmanship, and leadership in diagnostics, operator interface, and factory information processing.
Ritco Inc.
East Amherst, NY
The control services available from Ritco Inc. include system development, PLC programming, documentation, system monitoring, and maintenance. Vision system services include collection of inspection data, documentation, integration with existing control systems, lighting design, maintenance contracts, part evaluation & feasibility studies, turnkey vision systems, and training.
Olsson Controls
Springfield, OR
Olsson Controls provides full spectrum of controls & instrumentation solutions for their industrial and high-tech customers. They design, build and maintain automation systems of all sizes that integrate various pieces of equipment in order to increase optimization, safety and reliability. Olsson Controls' team of highly trained, qualified and seasoned engineers has the experience and expertise to get the job done effectively and efficiently. They stay ahead of the curve, providing their staff access to the latest in technological advancements.
ScottTech, LLC
Binghamton, NY
At ScottTech LLC, we take a nonproprietary approach to the design of automation systems and develop a working partnership with our clients. We evaluate long term goals and design the ideal system. With over 30 years of experience in the automation, packaging, and warehouse control/management, we understand successful integration. "Partner" with the company that has the knowledge to make you as effective, efficient, and profitable as you can be . . . ScottTech. ScottTech provides clients with innovative solutions using the best technology to improve production. We are committed to exceeding our client's expectations and delivering complete automation and data management solutions.
Mescon
Cheltenham, Vic, Australia
Our engineers have been in the Automation Industry since the early 1990s. Our current focus and expertise is PLC, SCADA and the transfer of Information. (MES/MIS/MOM/IIoT...) We have developed several projects from Green field sites through to service, maintenance and modifications. The 'off the shelf' MES systems we have used include Rockwell, Wonderware, GE and Citect solutions. We have also developed various custom solutions. The majority of the systems included interfacing with ERP Systems and MSSQL databases.
Hyperion International Technologies, LLC.
Austin, TX
At Hyperion, we pride ourselves in being able to assume any part of a project, as required by the customer. Our involvement may range from consulting/planning to turnkey implementation. As an engineering company, Hyperion does not exclusively represent specific manufacturers (although we enjoy productive relationships with many). Hyperion prescribes engineered solutions to meet customer requirements and priorities, based on a solid foundation of proven technologies. Hyperion is a limited liability company (LLC), and as such is owned and operated by its members. All of the members are active in the company, acting as project managers, engineers and designers. Members and employees at Hyperion wholly and personally subscribe to the credo that 'the customer comes first.' Our reputation is paramount, and our commitment to quality and integrity is evident in our dedicated, repeat customers.
Accurate Solutions & Designs, Inc.
Mayaguez, PR
ASD, founded in Mayaguez, PR in 1995, has earned an excellent reputation for the service and quality of their products. The firm consists of highly trained professionals with a strong background in the instrumentation and electrical engineering field both in design and construction. The company uses state-of-the-art technology to meet their customers' needs and exceed their expectations. ASD's goal is to deliver measurable value to their customers with high ethical standards and respect for individuals.
QDS Systems, Inc.
Baton Rouge, LA
QDS Systems focuses on industrial process drive and cotnrol systems (web handling system, crane and hoist drive systems, barge haul and pipe laying systems, specially packaging and test stand applications) as well as municipal control and instrumentation systems for the water and wastewater industry. Services include systems engineering, software configuration, UL508 panel building, system commissioning, training, and 24x7 support.
NeoMatrix, Inc.
Portsmouth, NH
NeoMatrix is a software and hardware services firm, offering a wide range of programming and integration services with a focus on Manufacturing Automation and Information Technologies. We help manufacturing companies implement Plant Automation Systems and Manufacturing Information Solutions that improve operational efficiencies and reduce manufacturing costs. Our solutions drive quality production processes and empower operations teams with access to both real-time and historical plant information and key performance metrics. NeoMatrix specializes in using web-based technologies in combination with PLC, HMI/SCADA, Historian and Reporting tools from the leading automation vendors to create scalable, reliable plant automation and information solutions. These systems can be rapidly configured and deployed to meet your plant's specific needs and budget.
Wunderlich-Malec Engineering
Gilbert, AZ
Wunderlich-Malec has successfully designed and implemented engineering solutions for commercial, industrial and government clients throughout North America and abroad since 1981. The key to our longevity and continued success is our adaptability combined with the depth of our talent. By offering a comprehensive menu of essential services in combination with a continuous willingness to engage in new challenges, we attract and retain some of the most skilled and sought-after talent in the industry. Wunderlich-Malec is one of the largest and most well-established engineering companies in the United States, with offices throughout the U.S. and more than 400 professionals on staff. We're confident that our qualified staff has the knowledge, experience and talent to create and deliver the solutions you need for your facility, process and operation needs.
Mangan, Inc.
Westlake Village, CA
Mangan Inc. is a nationally-recognized and employee-owned Specialty Engineering, Automation and Integration company serving the Critical Process Industries where successful project results are not negotiable. Leading Industry talent and Cutting Edge Technical Solutions have fueled a respectable list of long term clients. Industries Served - Refining, Chemical, Pipeline, Oil and Gas, BioPharmaceutical, Power & Distribution, Renewable Energy (Solar/Wind),and Utilities. Mangan, Inc. has nearly 350 direct employees that operate from nine offices across the United States: CA - Long Beach, WestLake Village and Concord, NC - Cary, TX - Houston, Lake Jackson, GA - Alpharetta, CO - Boulder, NH - Hampton. Mangan, Inc. has grown from $10MM in 1999 to over $50MM in 2015.
Prism Systems, Inc.
Mobile, AL
Since its establishment in 1989, Prism Systems, Inc. has been at the forefront of implementing advanced technology in industrial and manufacturing environments. Prism consists of a diverse group of engineering and programming professionals whose collective experience and varied backgrounds allows them to better understand and serve the ever-changing, industrial market. Using the latest advances in technology, Prism satisfies customers' desire for independent expertise and turnkey responsibility with cost efficient solutions to their industrial control, robot applications, inventory control, data management and presentation needs. Prism Systems offers the challenging solutions clients need in order to achieve unprecedented increases in productivity with a guarantee of innovative concepts, quality work, and beneficial results. Prism Systesm is organized into five divisions: Automation and Control, Software Development, Marine Products and Services, Environmental Products, and Water/Wastewater. Prism Systems' strategic objectives include technical expertise and training, customer service, relationship development, project management, competitive rates, and timely performance.
OBG
Syracuse, NY
The OBG Control Systems Integration (CSI) division has been providing advanced manufacturing solutions and control services over the past 25 years. Our CSI division is part of a larger Advanced Manufacturing group and even larger multi-disciplined engineering and construction firm giving us access to engineering and construction resources most other integrators do not have in house. Our CSI division design services includes everything within the project life cycle, we develop system solutions for power distribution, custom PLC /DCS panels, network architectures, PLC/DCS programming, HMI/SCADA development, data collection and storage, cloud/web solutions, advanced system reporting and process engineering. We have in-house corporate standards for the entire design/build life cycle or we can comply with your corporate standards. Ours include system planning (specifications, P&ID development, sequence of operations); electrical schematics (power distribution, control schematics, loop drawings, network diagrams) panel build and testing (factory acceptance testing, sight acceptance testing) and system commissioning. We are a unique blend of control system, computer, and electrical engineers; system integrators, electricians, computer scientists, programmers, designers and fabricators that understand and design process control systems. Our solutions include control system design, programming and user interface development using the latest hardware and software platforms to meet the requirements for every unique project.
Cascade Solutions
Tinley Park, IL
Cascade Solutions has been providing process and process automation services for over 21 years and has a current staff of approximately 15 people. The staff is made up of committed, profit-sharing employees. Its knowledge of what works and what does not work in a manufacturing environment is the most valuable component of Cascade's intellectual property. We offer process, instrument/electrical, and automation engineering services with expertise in a wide range of industries. Additionally, Cascade maintains an applications development group offering unique solutions for the most challenging system and data integration problems the industry presents. The merger of process, automation, and application engineering as our company focus enables us to provide services that are unparalleled. Our expertise in a variety of automation platforms is the result of having developed multiple successful projects over the company's 21-year history in all areas of process and automation engineering. The company's target markets are all highly regulated process industries that are intensive in their documentation requirements, including pharmaceutical, biotechnology, food and beverage, fine chemicals and refining. Commercial manufacturing facilities employing Cascade Solutions services enjoy the benefits of accomplishing key capital budgets on time, within budget, and with long-lasting quality of both processes and technology that meet critical FDA and related regulations.
IQ Corporation (IQC)
Walnut, CA
IQ Corporation provides comprehensive automation integration/systems integration services including sequence design, electrical design, panel design, UL panel construction, PLC programming, SCADA programming, database programming, start-up, commissioning, validation, and FDA 21 CFR 11 services. IQC's clients include pharmaceutical, biotech, pulp and paper, plastics, floor products, building products, and power tool manufacturers located throughout the United States. OQC focuses on system integration that leverages PLCs, Wonderware and GE Fanuc/Intellution SCADA systems, and database programming so that a client's plant is more automated (producing high quantities at high quality and lower cost), more flexible (easily changed between product lines, recipes, etc.), more connected (integrating plant operating data to front office functions), more easily operated (with reduced operator training and lower maintenance), and ultimately more profitable. IQC has been in business for over ten years, with a proven track record of delivering complex, up-time-critical applications in demanding, high visibility industries on time and on budget. IQC primarily programs the Allen-Bradley PLC line, Wonderware, and GE Fanuc/Intellution SCADA systems. IQC's Wonderware-based batching systems are unparalleled in the compounding industry. In addition, IQC has a sophisticated project methodology which will maximize a client's return on investment. The methodology utilizes a unique, deterministic, sequence-state design and programming protocol that produces sophisticated, robust, and safe process control and automation solutions very rapidly. This project methodology also results in a superior turn-over documentation package that allows customers to take full ownership of the system. IQC strives to train all customers to have complete ownership and understanding of the system's the company provides. IQC also offers PLC, Wonderware and GE Fanuc/Intellution SCADA training to their clients, both in-house and at the client's locations.
Fallgren Engineering
Napa, CA
Fallgren Engineering has engineers with over 25 years experience in providing PLC, SCADA & MES programming requirements for a vast array of industries such as Food and Beverages (wineries, hard cider, sodas, and various others), Hydroelectric Plants, Injection Molding, Aggregate Plants, Household Products (laundry products, various cleaning products, and more) & Chemical Plants, just to name a few.
Criterion Automation, Inc.
Riverside, CA
Criterion is a privately owned corporation with over 30 years of industrial process experience. We can provide integrated automation systems from simple process control applications to complete plant automation projects. We can also provide complete solutions from mechanical fabrication and hardware installation to custom application programming and system integration.
Core Automation, Inc.
El Dorado Hills, CA
Core Automation, Inc. is a California-based electrical engineering firm specializing in industrial facility electrical/control design with a major focus on the food and beverage, pharmaceutical, discrete, and bulk manufacturing environments. They are a single-source control system integrator with diverse capabilities in discrete and process control. The company consistently delivers services of high quality and value to their clients.
Leidos
Walled Lake, MI
Leidos is a solutions-based company that provides a full range of services including Architecture & Engineering Design, Infrastructure, Environmental, Systems Engineering and Integration, Advanced Communication Systems, Performance Contracting, Project Consulting & Development, DesignBuild Project Delivery and a variety of specialized consulting services. Our Systems Integration experts provide turnkey hardware and software development and integration to industries and process controls, factory information / quality control, and HVAC optimization and control systems. Our systems integration projects may be part of a DesignBuild project or may be executed alone, such as an Energy Management System.
Process Systems Integration Inc.
Cambridge, ON
Process Systems Integration has an extensive and very successful history in the automation world. PSI's design and programming teams are made up of the some of the brightest and most talented industry professionals. Although always looking to expand our customer base, PSI's core business is built on repeat customers. Specializing in discrete and process PLC, HMI, and robot programming, PSI also designs and commissions systems using VFD's, servo control, co-ordinated motion control, specialized controllers, safety PLC's, and safety hardware. PSI compliments process and mechanical design firms and machine builders to provide safe, efficient, reliable systems such as injection molding machines, robotic weld cells, assembly systems, material handling systems, and water treatment facilities. PSI also provides safety solutions for presses and roll form units. Partnered with our parent company, Process Group Inc, PSI can not only design solutions but install, commission and support them as well.
ASIC Corporation
Hamilton, OH
ASIC (Advanced System Integration & Control) Corporation is a single-source provider of industrial automation components, electro-mechanical system integration and panel building building services. ASIC specializes in motion control, servos, drives, PLCs and motor control with an engineering staff for programming/product support.
Birket Engineering, Inc.
Winter Garden, FL
Since 1984 award-winning Birket Engineering, Inc. has provided control system engineering, programming, assembly & installation services for industrial and entertainment applications. Birket has extensive experience with life-safety applications for rides, attractions & stunt shows worldwide including roller coasters, flame effects, pyrotechnics, show action equipment, and strobe lighting effects. The company is licensed as professional engineers and electrical specialty contractors. Our panel shop is ETL listed for compliance with UL-508A. Our lighting division creates unique lighting solutions for themed, theatrical, and signage applications. We have offices in Orlando, Hong Kong, Singapore, and Shanghai where we have extensive production resources.
Combustion Technology LLC
Vancouver, WA
Combustion Technology offers complete, custom-designed, and fabricated control systems for the combustion control and burner management industry. Each system is engineered to meet plant standards and industrial code requirements (FM, NFPA, IRI, etc.). The company offers control systems for recovery and power boilers, hog fuel and packaged boilers, furnaces, kilns, dryers, ovens, process heaters, and roof-top heating units.
L/A Automation, Inc.
Pinellas Park, FL
Specialize in custom one off applications. Able to provide concept through final design and construction of complete systems. Over 30 years experience in designing and building a wide variety of equipment for a wide variety of industries. We will sit down and discuss your requirements and provides a working concept for your unique requirements.
MAVERICK Technologies, a Rockwell Automation Company
Mobile, AL
MAVERICK Technologies is a global leader in industrial automation, enterprise integration and sustaining services for clients across a wide range of manufacturing and process industries. Leveraging its unique enterprise-wide perspective, MAVERICK identifies suboptimal operations and improves performance for greater safety, efficiency and overall profitability. The company's people, processes and technical capabilities ensure delivery of the right solution for every project, using the most appropriate technology. Organizations around the world depend on MAVERICK's responsiveness, results-driven approach and dedication to their success. To learn more, please visit www.mavtechglobal.com
Automation Engineering Company
Greenville, SC
AEC provides automated control systems to a variety of industries in the U.S. This includes super-alloy processing, nuclear fuel production, automotives, manufacturing, and material handling. AEC staff offer over 200 years of experience in PLC and PC based controls projects. All projects are delivered with exceptionally complete documentation. Complete in-house testing of all systems before delivery has resulted in short, trouble-free startup and commissioning for customers. AEC uses its depth of engineering skill to provide preliminary engineering services to customers, resulting in complete project definitions, accurate estimates, and short delivery times.
